Clarion VX401 Owner's Manual & Installation Manual page 19

Basic Operations
Adjusting the EQ
The EQ can be adjusted as follows.
1. Touch the [ ] or [
settings.
. To set your preferable setting, select User.
. Select from preset setting list:
Flat, Jazz, Pop or Classical.
Adjusting the Bass
The Bass gain and Bass frequency can
be adjusted as follows.
1. Touch [ - ] or [ + ] key to set the
desirable level.
. To set the Bass center frequency, enter
the Audio adjustment in the Settings
menu.
. To set the Bass Q-Factor, enter the Audio
Adjustment in the Settings menu.
Adjusting the Treble
The Treble gain and Treble frequency can
be adjusted as follows.
1. Touch [ - ] or [ + ] key to set the desirable
level.
. To set the Treble center frequency, enter
the Audio adjustment in the Settings menu.
Adjusting the Balance/Fader
The Balance or Fader can be adjusted as
follows.
1. Touch the [R] or [F] key to adjust to the
fader level.
• The factory default setting is "0".
(Adjustment range: front 9 to rear -9)
. Touch the [Left] or [Right] key to adjust to
the balance level.
• The factory default setting is "0".
(Adjustment range: left -9 to right 9).
Adjusting the Subwoofer
The Subwoofer can be adjusted as follows.
1. Touch the [ - ] or [ + ] key to adjust to
the subwoofer level.
• The factory default setting is "0".
(Adjustment range: left -9 to right 9).
Adjusting the Loudness
The Loudness can be adjusted as follows.
1. Touch the [ ] or [
On or Off.
] key to select your
] key to turn loudness
Adjusting the clock
1. Touch the [Settings] key. The Settings
menu will be displayed.
. Touch the [Clock] key in General sub
menu.
. Set up the time by touching the digital
numbers on the screen. After inputting the
time, you can choose AM or PM if the Clock
Mode is set to 1 Hr.
4. Touch the [Clock Mode] to change time
settings to 1Hr or 4Hr.
Reset to Factory Defaults
1. Touch the [Settings] key. The Settings
menu will be displayed.
. Touch the [Others] key.
. Touch the [Reset] key.
Select [YES] to restore your unit to factory
default settings. This function will erase all
memory from the unit and you must reset all
personalized items such as tuner presets.
NOTE:
• You will be asked once to confirm if you want
to use the default setting. The unit will close
the panel automatically.
19
VX401/VZ401