Source Operations; Radio Operations - Clarion CMV1 Owner's Manual

5. SOURCE OPERATIONS

Radio Operations

Changing the reception area
This unit is initially set to USA frequency intervals
of 10 kHz for AM and 200 kHz for FM. When
using it outside the USA, the frequency reception
range should be switched to the intervals below.
U.S.
standard
Frequency
10 kHz
spacing
Frequency 530 to
range 1,710 kHz
Frequency
200 kHz
spacing
Frequency 87.9 to
range 107.9 MHz
Setting the reception area
* All station preset memories are lost when the
reception area is changed.
1. Press the [AM/FM] button and select the
desired radio band (FM or AM).
2. Press the [OPTION] button.
3. Turn the [UP/DOWN] knob to select "Area
Change".
4. Press the [ENTER] button.
• U.S. standard (initial setting)
5-1 Turn the [UP/DOWN] knob to select "USA".
• Other countries (new setting)
5-2 Turn the [UP/DOWN] knob to select "ASIA".
• Europe standard (new setting)
5-3 Turn the [UP/DOWN] knob to select
"EUROPE".
6. Press the [ENTER] button.
Listening to broadcasts
1. Press the [AM/FM] button and select radio
mode.
2. Press the [AM/FM] button and select the
reception band. Each time the button is
pressed, the band changes as follows:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
Tuning
3 tuning modes are available: seek tuning,
manual tuning and preset tuning.
14
Other Europe
countries standard
9 kHz 9 kHz
531 to 531 to
1,629 kHz 1,602 kHz
50 kHz 50 kHz
87.0 to 87.5 to
108 MHz 108 MHz
Seek tuning
1. Press the [AM/FM] button and select the
desired band (FM/AM).
2. Press [X] or [V] to automatically seek a
station.
Manual tuning
2 modes are available: Quick tuning and step
tuning.
* If "MANUAL" does not appear in the display,
press and hold the [AM/FM] button (1 sec.).
●Quick tuning
Press and hold [X] or [V] (1 sec.) to tune a
station.
●Step tuning
Press [X] or [V] to manually tune a station.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2,
6-FM3, 6-AM) can be used to store broadcast
stations in memory.
1. Press the [AM/FM] button and select the radio
band.
2. Press the [MENU] buton.
3. Turn the [UP/DOWN] knob to select the
desired preset station.
4. Press the [ENTER] button to recall the stored
frequency.
Note:
* After the band selecting, you can also turn the
[UP/DOWN] knob to select a desired preset
station.
Manual memory
1. Use seek tuning or manual tuning to select the
desired station.
2. Press the [MENU] button.
3. Turn the [UP/DOWN] knob to select a preset
memory.
4. Press and hold the [ENTER] button
(2 sec.) to store the current station in preset
memory.
5. Press the [RETURN] button to return to the
previous mode.