Abbott Pima ANALYSER User Manual page 43

Power Error
The «Recharge battery» window
appears if the power level of the
integrated battery is too low to
conduct another analysis.
No further analyses can be
performed by the Pima Analyser
until the battery is recharged or the
analyzer is connected to A/C power.
Menu functions may still be active at this point. Press
•
It is recommended to connect the Pima Analyser to A/C power before the
integrated battery is completely discharged.
Printer Errors
Should the operator attempt to print
results with no USB Printer attached
to the Pima Analyser the «Failure»
window is displayed.
Should the USB Printer run out
of paper, the following window
is displayed.
After a new roll of paper has been
inserted, confirm continuation of
printing with . In case the error
〈
occurred during the printing of a
Pima Test Report, the last report will
be printed again.
For more information on the USB Printer, please refer also to the USB Printer
User Guide (UG-m-PIMA-02).
Pima™ ANALYSER USER GUIDE
2020-11-01
Recharge
battery
or
〈
2020-11-01
FAILURE
Printer error
Abort printing ?
2020-11-01
FAILURE
Paper required
Abort printing ?
11:05
to continue.
⌨
11:05
YES
NO
11:05
YES
NO
43
1
2
3
4
5
6
7
8
9