Advertisement
Quick Links
Smart Power Supply Chargers
Power System
Installation Guide
FPV4
4 amp @ 12VDC or
3 amp @ 24VDC
FPV6
6 amp @ 12VDC or 24VDC
For 230VAC input add "/E" to model number - example
For larger enclosure change E1 suffix to E2 in model number - example
TechSupport@LifeSafetyPower.com
FPV102
10 amp @ 12VDC
FPV104
10 amp @ 24VDC
LifeSafety Power
PH 888.577.2898
FPV6-C8E1/E
FPV6-C8E2
P03-057
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for LifeSafety Power FlexPower Vantage FPV4
Summary of Contents for LifeSafety Power FlexPower Vantage FPV4
- Page 1 10 amp @ 24VDC 6 amp @ 12VDC or 24VDC For 230VAC input add "/E" to model number - example FPV6-C8E1/E For larger enclosure change E1 suffix to E2 in model number - example FPV6-C8E2 LifeSafety Power PH 888.577.2898 TechSupport@LifeSafetyPower.com P03-057...
- Page 2 FlexPower Vantage Standard Power System - Installation Manual Symbol Definitions Batteries (if used) should be maintained at an ambient tem- The following symbols are used throughout this manual: perature of between 32 and 120 degrees Fahrenheit (0-49 Celsius) or premature loss of battery power could occur. This symbol is intended to alert the installer of shock hazards within the enclosure.
- Page 3 FlexPower Vantage Standard Power System - Installation Manual FPV4 Power Supply Overview This guide gives the basic information needed to install a system containing a single Vantage Power Supply for most applications. AC Voltage Select Jumper - - AC Select Leave INTACT for 120V input.
- Page 4 FlexPower Vantage Standard Power System - Installation Manual FPV6 Power Supply Overview - Read before Power Up This guide gives the basic information needed to install a system containing a single FPV Power supply for most applications. FPV6 AC Select Observe battery polarity Observe battery polarity...
- Page 5 FlexPower Vantage Standard Power System - Installation Manual FPV102/104 Power Supply Overview - Read before Power Up This guide gives the basic information needed to install a system containing a single FPV Power supply for most applications. FPV102 12V/10A ...
-
Page 6: Fai Input
FlexPower Vantage Standard Power System - Installation Manual FAI Input Usage This section provides more detailed information on the connection and usage of the FAI Input located on the main power supply board. Activation with a Normally Open Relay Contact Latching the FAI Input FAI Activates when the Latching of the FAI Input... -
Page 7: Tamper Switch Wiring
FlexPower Vantage Standard Power System - Installation Manual Tamper Switch Wiring Vantage power supply systems with an enclosure may in- FPV Power Supply clude a normally closed tamper switch for monitoring by the host panel. The tamper switch can either be brought SYS FAULT AC FAULT C NC NO... - Page 8 FlexPower Vantage Standard Power System - Installation Manual FPV4 / FPV6 Electrical / Mechanical Specifications FPV4 FPV6 AC Input Voltage 120VAC or 230VA at 50-60Hz 120VAC or 230VAC at 50-60Hz Current 1.8A maximum 3.7A maximum Standby Current 80mA 150mA DC Output at 12V Setting Voltage 11.3 - 12.0V 11.2 - 12.0V...
- Page 9 FlexPower Vantage Standard Power System - Installation Manual FPV102 / FPV104 Electrical / Mechanical Specifications FPV102 FPV104 AC Input Voltage 120VAC or 230VAC at 50-60Hz 120VAC or 230VAC at 50-60Hz Current 5.7A Standby Current 110mA 160mA DC Output Voltage 11.3 - 12.0V 23.4 - 25.0V (Auxiliary power-limited Max Current...
-
Page 10: General Applications
Conditions of Sale for this product, and in no case will LifeSafety Power or its distributors be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the product. Specifications are subject to change without notice.
Need help?
Do you have a question about the FlexPower Vantage FPV4 and is the answer not in the manual?
Questions and answers