Related Manuals for LifeSafety Power FlexPower RA150 Series
Summary of Contents for LifeSafety Power FlexPower RA150 Series
- Page 1 RA, RD Rackmount Installation Manual LifeSafety Power, Inc. | PH 888.577.2898 | TechSupport@LifeSafetyPower.com P03-032 Rev A06...
-
Page 2: Table Of Contents
RA Series, RD Series Rackmount Installation Manual Table of Contents Notes and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii Symbol Definitions . -
Page 3: Notes And Warnings
Notes and Warnings Symbol Definitions Regulatory Information The following symbols are used throughout this manual The equipment discussed within this manual has been test- ed to the following standards: This symbol is intended to alert the installer of shock hazards within the enclosure . Service should only be •... -
Page 4: Introduction
RA Series, RD Series Rackmount Installation Manual Introduction Product Description rackmount series of power supplies include removable terminal strips for field wiring, input and FLEXPOWER provide AC or DC power for lifesafety applications . De- output surge suppression, automotive blade fuses for im- signed to fit neatly into standard 19"... -
Page 5: Section 1 - Installation
Installation and Operation Section 1 – Installation The following pages cover the installation of the RA and RD Series rack-mountable power supplies . 1 .1 Mounting the Rack Mount Supply into a Standard 19" Rack Use the following procedure when mounting an RA or RD NOTE: Use rails or other appropriate support for heavy series supply into a standard EIA 19"... -
Page 6: Ra & Rd Rackmount Power Supply Overview
RA Series, RD Series Rackmount Installation Manual 1 .2 RA & RD Rackmount Power Supply Overview MAIN OUTPUT 2 MAIN OUTPUT 1 OUTPUTS OUTPUTS AC Power 10-100 Base-T No user serviceable parts inside OUTPUTS OUTPUTS refer servicing to qualified service personnel ... - Page 7 Installation and Operation The following are basic descriptions . Refer to the appropriate section for more detailed information . Note that the front and back panels may appear different based on the configuration of your system . with the full power of the associated power supply available Main AC Power Switch / Circuit Breaker on these terminals .
-
Page 8: Internal Pre-Configuration - Rd Series Only
RA Series, RD Series Rackmount Installation Manual 1 .3 Internal Pre-Configuration - RD Series Only Configuration internal to the rack mount enclosure is re- 1.3.4 Enabling or Disabling Battery Presence Detection quired on RD series power supplies prior to installation into Each FPO power supply may be set to detect a missing bat- a rack . - Page 9 Installation and Operation FPO75 Earth GND Battery DETECT FPO150 Voltage SELECT FPO250 230VAC jumper Figure 3 - Configuring the Internal FPO Power Supplies in an RD Series Supply cut jumper for 230VAC AC Input...
-
Page 10: Making The Wiring Connections - Ra And Rd Series
RA Series, RD Series Rackmount Installation Manual 1 .4 Making the Wiring Connections - RA and RD Series Field wiring connections are made on the rear panel after an FAI signal is received or to drop power when an FAI installing the RA or RD enclosure into the rack . -
Page 11: Fai Input Usage
FAI Input Usage This section provides more detailed information on the connection and usage of the FAI input . Activation with a Normally Open Relay Contact Latching the FAI Input FAI Activates when the Latching of the FAI Input FAI INPUT FAI INPUT FAI INPUT FAI INPUT... - Page 12 RA Series, RD Series Rackmount Installation Manual 1.4.3 Main AC Power Connection To connect the RA or RD series to the main AC power source, plug one end of the included computer-style AC cord into the AC Power connector on the back of the enclo- sure .
-
Page 13: Section 2 - Configuration And Usage
Configuration and Usage Section 2 – Configuration and Usage This section describes the final configuration as well as op- eration details for the RA and RD series power supplies . 2 .1 Removing the Faceplate of the Enclosure RD Series - Dual Supply Models Use the following steps to remove the faceplate of the rack- Each output is configurable for either internal power supply . -
Page 14: Remote Access Via Ethernet
RA Series, RD Series Rackmount Installation Manual 2 .5 Remote Access via Ethernet RA and RD Series power supplies with model numbers end- ing in "N" may be accessed over the internet or local intranet via the ethernet port on the back of the enclosure (Figure 6) . -
Page 15: Section 3 - Specifications
Specifications Section 3 – Specifications 3 .1 Electrical Specifications RD Series DC Power Supplies - Single Voltage Specifications RD75 Series RD150 Series RD250 Series AC Input Voltage 120/230VAC 120/230VAC 120/230VAC ±15% at 50-60Hz ±15% at 50-60Hz ±15% at 50-60Hz Power 100 Watts 200 Watts 300 Watts... - Page 16 RA Series, RD Series Rackmount Installation Manual Section 3 – Specifications RD Series DC Power Supplies - Dual Voltage Specifications RD75/75 Series RD150/150 Series RD250/250 Series AC Input Voltage 120/230VAC 120/230VAC 120/230VAC ±15% at 50-60Hz ±15% at 50-60Hz ±15% at 50-60Hz Power 200 Watts 400 Watts...
-
Page 17: Temperature Specifications
Specifications Section 3 – Specifications RA Series AC Power Supplies Specification RA100A RA150A FPA300A FPA600A AC Input Voltage 120VAC ±15% 120VAC ±15% 120VAC ±15% 120VAC ±15% at 60Hz at 60Hz at 60Hz at 60Hz Power 120 Watts 180 Watts 360 Watts 720 Watts Output Voltage... - Page 18 LifeSafety Power’s only ob- www .lifesafetypower .com ligations are those in the LifeSafety Power Standard Terms and Conditions of Sale for this product, and in no case will Tel (888) 577-2898 LifeSafety Power or its distributors be liable for any incidental, indirect, or consequential damages arising from the info@lifesafetypower .com...
Need help?
Do you have a question about the FlexPower RA150 Series and is the answer not in the manual?
Questions and answers