After proper cabling and checking, you can turn on the power. The area around the fan
must be free of obstacles. Start with a test run of 10 minutes.
If the operation of the fan works properly, instruct the operator and please use the handover
protocol for a formal handover.
5
Frequency Inverter
A variable frequency drive is integrated in the MonsterFans Controller Box. You will find
detailed technical instructions from the manufacturer attached. The frequency Inverter is
pre-programmed at the factory and ready for operation.
You will also find the following Wiring Diagram (3~400V, 50 Hz) printed inside the
Controller Box.
www.monsterfans.com
info@monsterfans.com
16