Table of Contents
Advertisement
8.3.8
Menu "CO
correcting value"
2
Fig. 33:
CO
correcting value
2
A correcting value for the measured CO
Correcting value
CO
2
Entering the correcting value for the CO
1. Select menu "Special functions".
2. Select menu "CO
–
The display shows the preset value.
3. Set the desired value with buttons "UP / DOWN".
–
This setting is configured in steps of 10 ppm.
4. Confirm your setting with the "OK" button.
Operating Instructions 2CKA001473B8822
is entered in this menu.
2
Information
If the measured CO
value is permanently influenced by external factors, a
2
correcting value can be entered. The displayed CO
the correcting value.
The correcting value can be set on the device between -800 ppm and +800
■
ppm in steps of 10 ppm.
value
2
offset".
2
Operation
value is then adjusted by
2
│32
Advertisement
Table of Contents
