Table of Contents
Advertisement
8.3.7
Menu "Temperature correcting value"
Fig. 32:
Menu "Temperature correcting value"
A correcting value for the measured temperature is entered in this menu.
Correcting value
Temperature
Entering the correcting value for the temperature
1. Select menu "Special functions".
2. Select menu "Temperature offset".
–
The display shows the preset value.
3. Set the desired value with buttons "UP / DOWN".
–
This setting is configured in steps of 0.5°C.
4. Confirm your setting with the "OK" button.
Operating Instructions 2CKA001473B8822
Information
If the measure temperature value is permanently influenced by external
factors, a correcting value can be entered. The displayed temperature is then
adjusted by the correcting value.
The correcting value can be set on the device between -5°C and +5°C in
■
steps of 0.5°C.
Operation
│31
Advertisement
Table of Contents
