Fig. 3:
Connecting the cables
Fig. 4:
Mounting the flush-mounted insert
Fig. 5:
Mounting the display
Operating Instructions 2CKA001473B8822
Connection, installation / mounting
1. Connect the cables to the flush-
mounted insert.
–
For the connection assignment,
see chapter 6.3 "Electrical
connection" on page 17.
2. Mount the flush-mounted insert.
3. Plug the attachment together with the
cover frame onto the flush-mounted
insert.
–
Ensure that the plug-in
connection on the rear side does
not get jammed.
–
If mounting is difficult, check
whether a burr has formed at the
lock-in opening of the flush-
mounted insert and remove it.
The device is now mounted.
│16