Connection, Installation / Mounting; Requirements For The Electrician - Busch-Jaeger 1091 U Operating Instructions Manual

Co2-sensor
Table of Contents

Advertisement

6

Connection, installation / mounting

Danger - Electric voltage!
Risk of death due to electrical voltage of 230 V during short-circuit in the low-
voltage conduit.
6.1

Requirements for the electrician

Danger - Electric voltage!
Install the device only if you have the necessary electrical engineering
knowledge and experience.
The minimum necessary expert knowledge and requirements for the installation
are as follows:
Operating Instructions 2CKA001473B8822
Low-voltage and 230 V conduits must not be installed together in a flush-
mounted box!
Incorrect installation endangers your life and that of the user of the electrical
system.
Incorrect installation can cause serious damage to property, e.g. due to fire.
Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect
2. Secure against being re-connected
3. Ensure there is no voltage
4. Connect to earth and short-circuit
5. Cover or barricade adjacent live parts.
Use suitable personal protective clothing.
Use only suitable tools and measuring devices.
Check the type of supply network (TN system, IT system, TT system) to
secure the following power supply conditions (classic connection to ground,
protective earthing, necessary additional measures, etc.).
Connection, installation / mounting
│14

Advertisement

Table of Contents
loading

Table of Contents