Advertisement
Available languages
Available languages
Operating instructions
• Insert the batteries into the charging
slots correctly according to the
polarity indications (+/-) see pic 1.
• Connect the charger into the power
outlet.
• The LED indicator status:
White LED pulsing on:
Charging in progress.
White LED steady on:
Charging complete.
Red LED flashing: Error.
• The red LED error indicator will flash if
non-rechargeable batteries, damaged
batteries are inserted into the charger
by mistake or connected batteries are
too hot.
Good to know
• Brand new batteries need 2 to 3
times of charging and usage cycles to
optimize the battery performance.
8
Advertisement
