Bunn MHG Use & Care Instructions page 2

CLEANING
STEP 1
Empty all beans from
hopper(s). Plug in the grind-
er, place funnel with filter
into funnel rails. Press and
release the GRIND button.
Run a few cycles until all
coffee in the grind chamber
is dispensed and disconnect
the grinder from the power
source.
STEP 5
Clean and sanitize the hop-
pers and lids. Care should
be taken not to scratch the
hoppers with any abrasive
material.
USE & CARE INSTRUCTIONS
STEP 2
Remove the funnel with fil-
ter and discard any remain-
ing coffee grounds.
NOTE: Bunn-O-Matic recom-
mends the 3 step method for
cleaning and sanitizing the
server. The 3 step method
consists of hot soapy water
using an approved deter-
gent, a fresh water rinse,
and an aqueous sanitizing
solution using an approved
non-chlorine sanitizer.
MHG GRINDER
STEP 3
Remove the hoppers by
sliding all the way forward.
STEP 6
Clean all exterior surfaces
using a damp cloth rinsed
in any mild, nonabrasive,
liquid detergent.
STEP 4
Remove the hopper lid from
the hopper.
STEP 7
Replace the hoppers and
fill with fresh whole bean
coffee. Replace the hopper
lids.
39480 101206