Table of Contents
Advertisement
Installing the Wall mount
Attaching the cable cover
Take up the cable slack, and then secure the cable cover with the screws as shown below.
Warning
Do not place the excess cable on top of the cable cover. Doing so could cause the mount to fall.
Turning on the projector and checking the screen
a
Plug in the projector.
b
Turn on the projector.
c
Adjust the vertical slide (arm angle) using screw (E) on the bottom of the arm plate. The
arm rises when you tighten the screw, and lowers when you loosen it.
27
Advertisement
Table of Contents
