Table of Contents
Advertisement
Installing the Wall mount
Assembly and Installation
Follow the work flow below to install the wall mount.
Installing the wall plate
a
Check the position where you want to install the wall plate, and then mark that position
on the wall.
Attach the wall plate so that the center of the screen and the marked gauge line of the wall plate are
on the same line as shown in the following illustration. Allow at least 5 cm space between the top of
the image projected onto the screen and the bottom of the wall plate.
After installing, you can slide the projector horizontally 4.5 cm by using the slider on the adjustment
unit. See "Turning on the projector and checking the screen"
a: Center of the wall plate
b: Center of the screen
b
Position the wall plate over the marks you made in step 1, and then mark the points where
the wall plate will be secured as shown in the following illustration.
Insert the anchors into at least three points. If you insert at four points, use the four point As or four
point Bs as shown below.
For 3 points
p.27
for more details.
For 4 points
21
Advertisement
Table of Contents
