Attaching The Cable Cover; Attaching - Epson EB-L1105U User Manual

Connecting Equipment
e
Connect the Quick Wireless Connection USB Key to the computer.
From this point on, see the user's guide supplied with the Quick
Wireless Connection USB Key.

Attaching the Cable Cover

By attaching the cable cover, you can hide the connected cables giving a
nice, clean finish to the projector installation. (The illustrations are of a
projector installed on a ceiling.)
Warning
Do not tie the power cord and other connection cables together. Otherwise, it
could cause a fire.

Attaching

a
Run a commercially available cable tie through the cable holder
and tie the cables together.
b
Insert the tabs on the cable cover into the two slots on the back
of the projector.
c
Tighten the two screws on the cable cover. (You can tighten the
screws with your fingers.)
54