Manual - HMS Networks Airconwithme Device Configuration

3.4

Manual

Tap on Manual (See
• In case to select the security open, type the SSID of the Wi-Fi network wanted. (See
Figure 3.10). Tap on Connect.
If the configuration network has been carried out successfully the light of the LED will follow
a light sequence (See
In case the light of the LED does not follow the sequence or start lighting different, start the
process from the beginning.
• In case to select the security WEP/WAP2 type the SSID of the Wi-Fi network wanted.
Also, type the password Wi-Fi network and to make sure is well entered slide Show
password selector (See
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
Figure 3.9)
Figure 3.9 Manual configuration procedure.
Figure 3.10
Figure 3.5). Tap on Done.
Figure 3.11). Tap on Connect.
Security Open.
Device Configuration 1.0
URL https://airconwithme.com
14 / 20