Atag VA5113BT User Manual page 34

34
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid
empty notification
Make sure the appliance is in user mode.
1. Press the programme button
immediately.
The indicator starts to flash.
2. Wait until the indicator
flash and the remaining programme
indicators are off.
The indicator shows the current
setting:
• is on = Rinse aid empty
notification is on.
• is off = Rinse aid empty
notification is off.
3. Press the programme button to
change the setting.
4. Press the on/off button to confirm the
setting.
Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
How to activate the acoustic
signal for the end of the
programme
Make sure the appliance is in user mode.
1. Press the programme button twice.
The indicator starts to flash.
2. Wait until the indicator
to flash and the remaining programme
indicators are off.
The indicator
setting:
3. Press the programme button to
4. Press the on/off button to confirm the
continues to
AirDry
AirDry improves the drying results with
less energy consumption.
AirDry is automatically activated with all
programmes excluding
continues
How to deactivate the AirDry
Make sure the appliance is in user mode.
shows the current
• is off = The acoustic signal is
off.
• is on = The acoustic signal is
on.
change the setting.
setting.
During the drying phase, the
door opens automatically and
remains ajar.
CAUTION! Do not try to close
the appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
CAUTION! If children have
access to the appliance, it is
advised to deactivate AirDry as
opening the door may pose a
danger.
(if applicable).