Advertisement
Available languages
Available languages
8
www.raider.bg
tool will do the job better and safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and /or the battery pack from the power tool before
making any adjustments, changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of
untrained users.
e. Use the power tool, accessories and tool bits etc. In accordance with these instructions and in
the manner intended for the particular type of power tool, taking into account the working conditions
and the work to be performed. Use of the power tool for operations different from those intended could
result in a hazardous situation.
5) Service
a. Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
b. Caution! The use of any accessories or additional tools other than those recommended in this
manual may lead to an increased risk of injury. Only use original replacement parts.
OPERATING
1. Connect the plug to an outlet.
2. Put the soldering iron on the stand, until soldering tip is well heated.
3. Melt some soldering tin on the soldering tip.
4. Put the soldering tip to the point to be soldered.
5. Send some soldering tin to the point, until soldering tin melt.
6. Melt some tin to the other soldering part.
7. Solder the two parts together; avoid over heated, cool the soldering point.
The machine, accessories and packaging should be sorted for environmental-friendly recycling.
The plastic components are labelled for categorized recycling. Do not dispose of power tools into
household waste! According the European Guideline 2002/96/EC for Waste Electrical and Electronic
Equipment and its implementation into national right, power tools that are no longer usable must be
collected separately and disposed of in an environmentally correct manner.
Advertisement
