At+Csq Signal Quality; Computer Data Adapter Interface Commands; Ate Command Echo; Atq Result Code Suppression - Nokia PremiCell Manual

AT+CSQ Signal Quality

This command returns the received signal strength indication <rs-
si>. Bit error rate indication is not support-
ed.
AT+CSQ Query signal strength.
Response is +CSQ: <rssi>, 99.
AT+CSQ=? Show supported values.
Response is +CSQ: (list of supported <rssi>s), 99.
Values for <rssi>:
0 -113dBm or less
1 -111 -112dBm
2...30 -109...-53 dBm
31 -51 dBm or greater
99 not known or not detectable

2.4. Computer Data Adapter Interface Commands

ATE Command Echo

This command determines whether or not characters that are re-
ceived from the DTE are echoed in the command mode.
Syntax:
ATE[0]
ATE1

ATQ Result Code Suppression

This command determines whether or not responses are sent to the
DTE. Syntax:
ATQ[0]
ATQ1
24
Disable echoing.
Enable echoing.
Enable sending of responses to DTE.
Disable sending of responses to DTE.
ã2000 Nokia Mobile Phones. All Rights Reserved.
Syntax: