S-Registers - Nokia PremiCell Manual

3. S-Registers

S-Reg
Default
of the settings is from 0 to 255
S0 Defines the number of rings after which the termi-
nal automatically answers the call (Auto Answer
Function). If the setting is 0, automatic answer is
disabled.
S1 Ring count (read only)
S2 Escape code character
S3 Carriage return character
S4 Line feed character
S5 Backspace character
S7 Wait for connection completion (seconds)
(0=connection waiting time is unlimited).
S8 Sets the duration, in seconds, for the pause (,)
option in the dial command.
S10 DCD OFF to hang-up delay (seconds/10). Setting
255 signifies that the connection will not be
cleared even if the DCD drops.
Default is 6 seconds.
S12 Escape Guard Time (seconds/50) 0=escape disabled.
S14 For changing the S14 settings, use the following AT
commands: ATEn (n=1) to enable the key presses to
be displayed on the screen or (n=0) to disable,
ATQn (n=0) to enable or (n=1) to disable the
responses,
ATVn to switch between the textual (long format)
responses
ã2000 Nokia Mobile Phones. All Rights Reserved.
Unless otherwise specified the value range
0
0
43
13
10
8
60
2
100
50
10
55