Stiga stig Instruction Manual page 47

4.3.5. FORCED RETURN TO CHARGING BASE - RETURN TO BASE BUTTON
The "RETURN TO BASE" button (G) allows to force the robot lawn mower to return to the charging base.
If the button (G) flashes when the cover (B) is opened, the robot lawn mower is already returning to the
charging base.
Procedure:
1. Press the button "STOP" (A) to open the cover (B) and access the control console (C).
2. Press the "RETURN TO BASE" button (G).
3. When the button lights up in green, it means that the function is active.
4. Close the cover (B).
5. The robot lawn mower will start and automatically return to the charging base.
NOTE: If the battery is low, when the "RETURN TO BASE" button (G) is pressed, the battery
icon will flash red to indicate that the action cannot be performed.
NOTE: the robot lawn mower starts only after closing the cover (B).
NOTE: the robot lawn mower will reach the charging base with the cutting device deactivated.
A C
EN
B G
4. OPERATION
47