Stiga stig Instruction Manual page 39

3.7.13. RUN BESIDE WIRE
The "Run beside wire" section allows to set the maximum navigation
distance from the perimeter cable during the return to the base and when
reaching the starting points.
The robot lawn mower will navigate at a variable distance from the cable
from 0 m to the set value, this will reduce wheel marks on the lawn.
NOTE: The user must choose the maximum distance based on
any obstacles present on the garden.
Set the maximum distance for the robot lawn mower to travel with respect
to the perimeter wire through the cursor (A).
3.7.14. CHANGE BORDER SIGNAL
The "Change border signal" section allows you to change the channel of the
signal transmitted by the perimeter cable.
NOTE: This operation is necessary if interferences are noticed
between two or more nearby installations. Changing the perimeter
channel must be done when the robot lawn mower is in the
charging base.
1. From the section (A) it is possible to change the communication
channel of the perimeter signal.
2. Follow the guided procedure.
EN
3. INSTALLATION
A
A
39