Cisco 815 Hardware Installation Manual page 77

Appendix C Installing and Upgrading Memory and Virtual Private Network Modules
Step 4
Figure C-9 Retention Clip Location
Slide this peg beneath
the connector's edge
OL-9558-01
To secure the VPN board connection in the socket, you must attach a retention
clip.
The retention clip for the Cisco 815 integrated services router slides over the
a.
VPN module where it connects to the socket and clips to the side of the router
motherboard. The horizontal tab slides underneath the WIC 0 socket, as
shown in Figure C-9.
Align the post in the middle of the clip with the hole in the center of the socket
b.
side of the VPN card as shown in
Cisco 815 Integrated Services Router Hardware Installation Guide
Installing a VPN Module
Figure C-10.
C-9