Chapter 3
Troubleshooting
Enter the enable command to enter privileged EXEC mode. Configuration
Step 7
changes can be made only in this mode.
Router> enable
The prompt changes to the privileged EXEC prompt:
Router#
Enter the show startup-config command to display an enable password in the
Step 8
configuration file:
Router# show startup-config
If you are using an enable password, it will appear in the startup configuration.
Write down the password and keep the record secure.
If you are using an enable secret password, there will be no enable password in
the startup configuration.
Enter the copy startup-config running-config command to return to your startup
Step 9
configuration:
Router# copy startup-config running-config
If you are recovering an enable password, skip the next section,
Password," and complete the password recovery process by performing the steps
in the
If you are resetting an enable secret password, you will not see it displayed in the
show startup-config command output. Complete the password recovery process
by performing the steps in the
OL-9558-01
"Resetting the Configuration Register Value"
Cisco 815 Integrated Services Router Hardware Installation Guide
section.
"Resetting the Password"
Recovering a Lost Password
"Resetting the
section, which follows.
3-5