Cisco 815 Hardware Installation Manual page 31

Chapter 1 Overview
H W I C - C
Table 1-2 Back Panel Connectors
Connector/Slot
Ethernet port
Auxiliary port
Console port
WIC-4ESW (WIC 0)
HWIC-CABLE-D-2
(WIC 1)
OL-9558-01
Figure 1-4 WIC-4ESW
W IC
4 E S W
A C T
4 x
L N K
A C T
3 x
L N K
A C T
Figure 1-5 HWIC-CABLE-D-2
A B L E - D
- 2
C A B L E
Label/Color
10/100
ETHERNET
(yellow)
AUX
(black)
CONSOLE
(blue)
No label
No label
Cisco 815 Integrated Services Router Hardware Installation Guide
2 x
L N K
A C T
1 x
L N K
D S
U S
L IN K
O N L IN E
P O W E R
Description
Connects the router to the local Ethernet network. This
port autosenses the speed (10 Mbps or 100 Mbps) and
duplex mode (full- or half-) of the device to which it is
connected, and then operates at the same speed and in the
same duplex mode.
Connects to a modem for remote configuration using
Cisco IOS software.
Connects to a terminal or PC for local configuration
using Cisco IOS software.
Supports interface card with four 10/100-BASE-TX
Ethernet switchports. See
Supports one Cisco cable WIC. See
Back Panel Ports and LEDs
Figure 1-4.
Figure 1-5.
1-5