Table of Contents
Advertisement
Quick Links
Release Notes for the Cisco 811 and 813 Routers
for Cisco IOS Release 12.1(2)XF
February 20, 2002
These release notes describe new features and significant software components for the Cisco 811
and 813 Routers that support Cisco IOS Release 12.1(2)XF5. These release notes are updated as needed
to describe new memory requirements, new features, new hardware support, software platform
deferrals, microcode or modem code changes, related document changes, and any other important
changes. Use these release notes with the Cross-Platform Release Notes for Cisco IOS Release
12.1 located on Cisco.com and the Documentation CD-ROM.
For a list of the software caveats that apply to Release 12.1(2)XF5, refer to the section "Caveats" and
to the online Caveats for Cisco IOS Release 12.1 T document. The caveats document is updated for
every 12.1 T maintenance release and is located on Cisco.com and the Documentation CD-ROM.
Contents
These release notes discuss the following topics:
System Requirements, page 1
•
•
New and Changed Information, page 6
Limitations and Restrictions, page 7
•
•
Important Notes, page 9
Caveats, page 11
•
Related Documentation, page 13
•
•
Obtaining Documentation, page 21
Obtaining Technical Assistance, page 22
•
Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2000-2002. Cisco Systems, Inc. All rights reserved.
78-11070-02, Rev. H0
Advertisement
Table of Contents
Related Manuals for Cisco 811
Summary of Contents for Cisco 811
-
Page 1: Table Of Contents
Cisco IOS Release 12.1(2)XF February 20, 2002 These release notes describe new features and significant software components for the Cisco 811 and 813 Routers that support Cisco IOS Release 12.1(2)XF5. These release notes are updated as needed to describe new memory requirements, new features, new hardware support, software platform deferrals, microcode or modem code changes, related document changes, and any other important changes. -
Page 2: System Requirements
For detailed descriptions of new hardware features, see New and Changed Information, page 6. Table 2 Supported Interfaces for the Cisco 800 Series Router Cisco 811 Cisco 813 Release Notes for the Cisco 811 and 813 Routers for Cisco IOS Release 12.1(2)XF Image Name Image c800-y6-mw IP Plus c800-sy6-mw... -
Page 3: Upgrading To A New Software Release
You can also reach the IOS Upgrade Planner, which allows you more flexibility to browse for your preferred software, by going to www.cisco.com and following this path: Service & Support: Software Center: IOS Upgrade Planner. 78-11070-02, Rev. H0 Release Notes for the Cisco 811 and 813 Routers for Cisco IOS Release 12.1(2)XF System Requirements... - Page 4 Each feature set contains a specific set of Cisco IOS features. Release 12.1(2)XF5 supports the same feature sets as Releases 12.1 and 12.1 T, but Release 12.1(2)XF5 can include new features supported by the Cisco 811 and 813 Routers. Table 3 lists the feature sets supported by the Cisco 811 and 813 Routers.
- Page 5 PAP, CHAP, Local Password, MSCHAP Route and Router Authentication Token Card Authentication 78-11070-02, Rev. H0 Feature Sets IP/IPX IP Plus Plus Release Notes for the Cisco 811 and 813 Routers for Cisco IOS Release 12.1(2)XF System Requirements IP/FW IP/IPX/FW Plus Plus IP/FW IPSec 56...
- Page 6 IPX and SPX Spoofing ISDN Caller ID Callback Snapshot Routing STAC Compression Weighted Fair Queuing Quality of Service X.25 ID Release Notes for the Cisco 811 and 813 Routers for Cisco IOS Release 12.1(2)XF Feature Sets IP/IPX IP Plus Plus IP/FW...
-
Page 7: New And Changed Information
The following sections list the new hardware and software features supported by the Cisco 800 series for Release 12.1 T: New Hardware and Software Features in Release 12.1(2)XF3 The following sections list the new hardware and software features supported by the Cisco Cisco 811 and 813 Routers for Release 12.1(2)XF3. Cisco 811 and 813 Routers Cisco 800 series routers provide network connectivity for small offices and corporate telecommuters. - Page 8 Image Names c800-nsy6-mw c800-nosy656i-mw c800-osy656i-mw c800-nosy656i-m c800-y6-mw c800-oy6-mw c800-sy6-mw c800-osy6-mw c800-osy656i-mw c800-nsy6-mw c800-nosy656i-mw Release Notes for the Cisco 811 and 813 Routers for Cisco IOS Release 12.1(2)XF MIBs NOVELL-IPX-MIB NOVELL-RIPSAP-MIB OLD-CISCO-NOVELL-MIB CISCO-IP-ENCRYPTION-MIB CISCO-BULK-FILE-MIB CISCO-CALL-HISTORY-MIB CISCO-CAR-MIB CISCO-IMAGE-MIB (added) CISCO-IP-STAT-MIB CISCO-ISDN-MIB CISCO-ISDNU-IF-MIB...
-
Page 9: Important Notes
Important Notes The following sections contain important notes about Cisco IOS Release 12.1(2)XF5 that can apply to the Cisco 811 and 813 Routers. (Also, see the “Caveats” section on page 11.) Caveat CSCdr91706 and IOS HTTP Vulnerability A defect in multiple releases of Cisco IOS software causes a Cisco router or switch to halt and reload if the IOS HTTP service is enabled and you browse to http://router-ip/anytext?/ and enter the enable password when it is requested. - Page 10 Flash and re-burn the Boot ROM. This problem has been resolved in TinyROM version 1.0(3), a downloadable ROM upgrade available from Cisco.com. Contact Cisco to upgrade to this version or later, and prevent this problem from occurring. Release Notes for the Cisco 811 and 813 Routers for Cisco IOS Release 12.1(2)XF 78-11070-02, Rev. H0...
-
Page 11: Caveats
To reach the Bug Toolkit, log in toCisco.com and click Service & Support: Technical Assistance Center: Tool Index: Bug Toolkit. Another option is to go to http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. 78-11070-02, Rev. H0 Release Notes for the Cisco 811 and 813 Routers for Cisco IOS Release 12.1(2)XF System Requirements... - Page 12 This section describes possibly unexpected behavior by Release 12.1(2)XF3. CSCds04747 Connection setup improvements. CSCds32217 D-write community string readable with read-only community, Cisco IOS. Release Notes for the Cisco 811 and 813 Routers for Cisco IOS Release 12.1(2)XF 78-11070-02, Rev. H0...
-
Page 13: Related Documentation
ISDN line is not provided. Related Documentation The following sections describe the documentation available for the Cisco 811 and 813 Routers. Typically, these documents consist of hardware and software installation guides, Cisco IOS configuration and command references, system error messages, feature modules, and other documents. - Page 14 Toolkit. Another option is to go to http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. Platform-Specific Documents These documents are available for the Cisco 811 and 813 Routers on Cisco.com and the Documentation CD-ROM: Cisco 811 and 813 Routers Cisco 811 and Cisco 813 Routers Hardware Installation Guide •...
-
Page 15: Feature Navigator
Contact Database Administration group at cdbadmin@cisco.com. If you do not have an account on Cisco.com, go to http://www.cisco.com/register and follow the directions to set up an account. 78-11070-02, Rev. H0 Release Notes for the Cisco 811 and 813 Routers for Cisco IOS Release 12.1(2)XF System Requirements... - Page 16 Technical Documents: Documentation Home Page: Cisco IOS Software Configuration: Cisco IOS Release 12.1 On the Documentation CD-ROM at: Cisco Product Documentation: Cisco IOS Software Configuration: Cisco IOS Release 12.1 Release Notes for the Cisco 811 and 813 Routers for Cisco IOS Release 12.1(2)XF 78-11070-02, Rev. H0...
- Page 17 Configuring the Airline Product Set Configuring DSPU and SNA Service Point Support Configuring SNA Switching Services Configuring Cisco Transaction Connection Configuring Cisco Mainframe Channel Connection Adapters Release Notes for the Cisco 811 and 813 Routers for Cisco IOS Release 12.1(2)XF System Requirements...
- Page 18 • Cisco IOS IP and IP Routing Configuration Guide • Cisco IOS IP and IP Routing Command Reference Release Notes for the Cisco 811 and 813 Routers for Cisco IOS Release 12.1(2)XF 12.1 Documentation Set (continued) Chapter Topics Configuring CLAW and TCP/IP Offload Support...
- Page 19 Configuring Link Fragmentation and Interleaving for Multilink Configuring Compressed Real-Time Protocol IP to ATM CoS Overview Configuring IP to ATM CoS QoS Features for Voice Introduction Release Notes for the Cisco 811 and 813 Routers for Cisco IOS Release 12.1(2)XF System Requirements...
- Page 20 • Cisco IOS Switching Services Configuration Guide • Cisco IOS Switching Services Command Reference • Release Notes for the Cisco 811 and 813 Routers for Cisco IOS Release 12.1(2)XF 12.1 Documentation Set (continued) Chapter Topics TACACS+ Commands Access Control Lists: Overview and Guidelines...
-
Page 21: Obtaining Documentation
78-11070-02, Rev. H0 12.1 Documentation Set (continued) Chapter Topics Wide-Area Networking Overview Configuring ATM Frame Relay Frame Relay-ATM Internetworking Configuring SMDS Configuring X.25 and LAPB Release Notes for the Cisco 811 and 813 Routers for Cisco IOS Release 12.1(2)XF System Requirements... -
Page 22: Obtaining Technical Assistance
To display the TAC web site that includes links to technical support information and software upgrades and for requesting TAC support, use www.cisco.com/techsupport. To contact by e-mail, use one of the following: Release Notes for the Cisco 811 and 813 Routers for Cisco IOS Release 12.1(2)XF 78-11070-02, Rev. H0... -
Page 23: Documentation Feedback
Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco. 78-11070-02, Rev. H0 E-mail Address tac@cisco.com chinese-tac@cisco.com japan-tac@cisco.com korea-tac@cisco.com tac@cisco.com thai-tac@cisco.com Release Notes for the Cisco 811 and 813 Routers for Cisco IOS Release 12.1(2)XF System Requirements... - Page 24 All other trademarks mentioned in this document or Web site are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0201R) Copyright © 2000–2002, Cisco Systems, Inc. All rights reserved. Release Notes for the Cisco 811 and 813 Routers for Cisco IOS Release 12.1(2)XF 78-11070-02, Rev. H0...