Test curve burr,
Waveform is not smooth
Saturation of the front end of
the test curve
Slow down the test curve
starting end reflection peak,
trailing phenomenon
Website:
www.baudcom.com.cn
Incorrect
output
connection
Pulse setting small
Incorrect channel settings
Pulse width setting
Incorrect channel settings
The output end of the optical
fiber is polluted
Optical
output
Email:
info@baudcom.cn
76
interface
Reconnect
output interface
Increase test pulse width
Modify
parameters
Reduce
parameters
Modify
parameters
Clean light output face
connector Replace output connector
Tel: +86-21-37709251
the
appropriate
test
channel
test
pulse
width
test
channel