Chapter 2 Setting Up The Vr101; Introduction; Connecting The Optical Interface Cable; Starting Eventview - Fluke VR101S User Manual

Setting Up the VR101

Introduction

This chapter explains how to use EventView
to program the internal settings of the recorder.

Connecting the Optical Interface Cable

The EventView program communicates with the
recorder via the Optical Interface Cable.
•
Plug this cable into an available 9-pin COM port in
your computer.
If your computer has only a 25-pin COM port, plug a
9- to 25-pin adapter (not included with your interface
package) into your computer, and plug the interface
cable into the adapter.

Starting EventView

•
Windows 3.1 users double-click the Fluke
EventView program icon EV101 in the Fluke PQ
Tools group window.
(Double-click the Update Readme icon to read the latest
information about the VR101S.)
Chapter 2
TM
software
11