Vaisala MD30 Reference Manual page 7

Reference Guide
Replacing surface temperature sensor
•
Screwdriver Torx 10
1
1. Loosen the 4 screws that hold the temperature sensor in place, remove the sensor, and
disconnect the sensor cable.
2. Connect the sensor cable to the replacement sensor.
3. Attach the replacement sensor with 4 screws.
More information
‣ MD30 maintenance (page 1)
‣ MD30 maintenance checklist (page 15)
2
1 Surface temperature sensor
2 Screw (4 pcs)
M212309EN-D
7