Vaisala MD30 Reference Manual page 4

Reference Guide
Cleaning surface temperature sensor
•
Cotton swab
•
Compressed air or air pump
•
Glass cleaner
1
Clean the surface temperature sensor annually, or more often if conditions require it.
1. Remove the surface temperature sensor from the body.
2. Apply glass cleaner on the surface temperature sensor. Insert a cotton swab in the thread and
turn it clockwise. Remove the cotton swab by turning it counterclockwise in the thread. If
required, use compressed air or an air pump.
3. Attach the surface temperature sensor to the body.
More information
‣ MD30 maintenance (page 1)
‣ MD30 maintenance checklist (page 15)
4
1 Surface temperature sensor
M212309EN-D