Two Steps-Pair, Stream - Cochlear Nucleus 6 User Manual

About this Guide
Two steps—pair, stream
Using your wireless accessory for the first time is a two-step process:
Step 1: Pair
Pair your wireless accessory with your sound processor/s so they can
communicate (you only need to do this the first time).
Step 2: Stream
Streaming lets you transmit audio from your wireless accessory to your
sound processor.
A separate section for each wireless accessory tells you how to pair and
stream:
• "Mini Microphone" on page 7
• "TV Streamer" on page 15
• "Phone Clip" on page 22.
NOTE
If your Sound Processor buttons are programmed to adjust volume
and sensitivity (Advanced Mode), you cannot use Option 3 (Sound
Processor) in the streaming steps for your Mini Microphone or TV
Streamer. You will need to use Option 1 or Option 2, which show you
how to stream using your Nucleus CR230 or Nucleus CR210.
6 - Wireless Accessories © Cochlear Limited 2017