Cochlear Nucleus 6 User Manual page 25

6. Turn ON your sound processor(s). It briefly flashes a blue indicator
light to tell you pairing has been successful.
7. You can now put your sound processor(s) back on your ear(s).
Step 1b: Pair your mobile phone to the Phone Clip:
8. Turn on Bluetooth on your mobile phone.
9. Press the blue pairing button on the back of the Phone Clip. The
LED on the top of the Phone Clip lights blue for 2 minutes. While
this light is blue you need to pair the Phone Clip with your mobile
phone.
10. On your mobile phone, select the Hearing Aid Phone from the list
of Bluetooth devices.
11. Replace the silver cover on the base of the Phone Clip.
Now you can use your Phone Clip. Go to Step 2: Use the Phone Clip.
© Cochlear Limited 2017
NOTE
After pairing, if you are not wearing your sound
processor, the blue light will change to orange
warning that your coil is not connected.
Mobile phone
pairing button
Wireless Accessories - 25
Phone Clip