6
Run the hydrostatic transmission cable along with
the other cables. Place the hydrostatic transmission
cable on the bottom in the cable bracket under the
articulated steering's bearing.
7
Place the hydrostatic transmission cable in place
and screw the casing on with the rear bracket.
8
Adjust the hydrostatic transmission cable as shown,
see Checking and Adjusting the Accelerator.
Connect the rear link joint and attach the spring lock.
Tighten the rear link joint's lock nut.
9
Check the settings of the neutral position contact.
10
6019-026
Fasten the hydrostatic transmission cables with a
plastic binding.
11
8009-214
Screw on the frame plate, 4 screws.
8009-203
Repair Instructions
~80
6019-019
6019-021
41
English –