Battery - Jonsered FR 13 Workshop Manual

Battery

WARNING!
Actions following contact
with acid
External: Rinse thoroughly with water.
Internal: Drink large quantities of water or
milk. Contact a doctor as soon as
possible.
Eyes: Rinse thoroughly with water. Contact
a doctor as soon as possible.
The battery emits explosive gases. Sparks,
flames, and cigarettes must not be present
in the vicinity of the battery.
The battery is delivered dry charged from the
factory. The cells are fitted with seals. The battery
plugs are packed in a plastic bag.
• Slowly fill the battery cells with battery acid to the
max. level mark on the battery container.
• Wait 20 minutes and then top up with battery
acid as needed.
• Charge the battery with 12 V, max. 6 A, for four
(4) hours.
• Check the electrolyte level and top up if neces-
sary with distilled water to the upper level marks
on the battery container.
Fit the battery.
Connect the battery with the nuts and bolts that are
attached to the battery. Counter the bolts when
fitting so that the electrodes are not strained.
• The black cable connects to -.
• The red cable connects to +.
Ensure that the cables do not rub against anything.
Fit the cover on the battery and tighten the strap.
Delivery Procedures
6010-007
6008-013
8009-111
11
English –