Jonsered FR 13 Workshop Manual page 24

Repair Instructions
5
Remove the hose clamp on the fuel hose by the
fuel pump and pull the fuel hose downwards.
6
Loosen the clamps on the exhaust pipe Then
remove the exhaust pipe.
7
Use flat-nosed pliers to grip the cable holder under
the engine belt pulley and pull the cable holder
downwards.
22
– English
8
8009-108
Push tool no. 506 79 06-01 into the centre of the
engine belt pulley. Loosen and remove the Allen
screw that holds the belt pulley and engine shaft
together. Use tool no. 506 89 92-01 to counter.
Loosen the belt pulley from the engine shaft.
9
6012-091
Remove the engine fixtures, two on each side of the
engine, and remove the engine from the rider.
6012-007
6012-008
8009-117