Installing Display Assembly; Display Bezel; Removing Display Bezel - Dell Latitude 5480 Owner's Manual

Installing display assembly

Steps
1. Place the chassis on the edge of a plane surface.
2. Align the display assembly to align with the screw holders on the computer.
3. Tighten the M2*5 screws to secure the display assembly to the computer.
4. Connect the display cable to the connector on the system board.
5. Place the metal bracket to secure the display cable.
6. Tighten the M2*5 screws to secure the display cable.
7. Route the WLAN and WWAN cables through the routing channels.
8. Install the:
a. display hinge cover
b. hard drive assembly(optional)
c. WLAN card
d. WWAN card(optional)
e. battery
f. base cover
9. Follow the procedure in

Display bezel

Removing display bezel

Steps
1. Follow the procedure in
2. Remove the:
a. base cover
b. battery
c. display hinge cover
d. WLAN card
e. WWAN card (optional)
f. display assembly
3. To remove the display bezel:
a. Pry the display bezel at the base of the display [1].
b. Lift the display bezel to release it [2].
c. Pry the edges on the side of the display to release the display bezel [3, 4].
CAUTION: The adhesive used on the LCD bezel to seal it with the LCD itself, makes it hard to remove the
bezel as the adhesive is very strong and tends to stay stuck to the LCD portion and can peel the layers up
or crack the glass when trying to pry the two items apart.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components 47