Installing coin cell battery
Steps
1. Affix the coin cell battery on the system board.
2. Connect the coin cell battery cable to the connector on the system board.
3. Install the:
a.
battery
b.
base cover
4. Follow the procedure in
WLAN card
Removing WLAN card
Steps
1. Follow the procedure in
2. Remove the:
a.
base cover
b.
battery
3. To remove the WLAN card:
a. Remove the M2*3 screw that secures the WLAN card to the computer [1].
b. Remove the metal bracket that secures the WLAN cables [2].
c. Disconnect the WLAN cables from the connectors on the WLAN card [3].
d. Lift the WLAN card away from the connector [4].
26
Removing and installing components
After working inside your
Before working inside your
computer.
computer.