Installing optional M.2 SSD
Steps
1. Insert the SSD clip into the slot on the computer.
2. Replace the M2*3 screw to secure the SSD clip to the computer.
3. Insert the SSD into the connector on the computer.
4. Place the Mylar shield over the SSD.
5. Install the:
a.
battery
b.
base cover
6. Follow the procedure in
Hard drive
Removing hard drive assembly
Steps
1. Follow the procedure in
2. Remove the:
a.
base cover
b.
battery
3. To remove the hard drive assembly:
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
23