Installing Wlan Card; Wwan Card (Optional); Removing The Wwan Card; Installing The Wwan Card - Dell Latitude 5480 Owner's Manual

Installing WLAN card

Steps
1. Insert the WLAN card into the connector on the system board.
2. Connect the WLAN cables to the connectors on the WLAN card.
3. Place the metal bracket to secure the WLAN cables.
4. Tighten the M2*3 screw to secure the WLAN card to the computer.
5. Install the:
a. battery
b. base cover
6. Follow the procedure in

WWAN card (Optional)

This is optional as the system might not ship with WWAN card.

Removing the WWAN card

Steps
1. Follow the procedure in
2. Remove the:
a. base cover
b. battery
3. To remove the WWAN card:
a. Remove the screw that secures the WWAN card.
b. Disconnect the WWAN cables from the connectors on the WWAN card.
c. Unroute the WWAN cables from the routing channel.
d. Remove the WWAN card from the computer.

Installing the WWAN card

Steps
1. Insert the WWAN card into the slot on the computer.
2. Route the WWAN cables through the routing channel.
3. Connect the WWAN cables to the connectors on the WWAN card.
4. Replace the screw to secure the WWAN card to the computer.
5. Install the:
a. battery
b. base cover
6. Follow the procedure in

Memory modules

Removing memory module

Steps
1. Follow the procedure in
After working inside your
Before working inside your
After working inside your
Before working inside your
computer.
computer.
computer.
computer.
Removing and installing components 27