Operating Instructions; Operating Modes; Stand Alone; Unison Strobe (With Optional Strobe Controller) - Chauvet ST-750 User Manual

4. Operating Instructions

Operating Modes

• A stand-alone mode will allow the user to set the desired speed and intensity.
• Master/Slave output provides for unison triggering of chained strobes.

Stand Alone

The Stand Alone mode is activated automatically when the fixture is absent of a CH-751 or a SC-
1000M controller. The strobe speed and strobe intensity can all be adjusted and they are located on
the bottom of the fixture.

Unison Strobe (with optional strobe controller)

The Unison strobe mode will allow you to link additional units in a daisy chain fashion. Simply connect
the first fixture to the strobe controller, and connect each fixture in a daisy-chain fashion using a ¼"
MONO phone cable.
Strobe Controller
ST-750 User Manual
SPEED DIM
8
DIM
SPEED
DIM
SPEED
2007-03-20 15:10
/
DIM
SPEED