Advertisement
CHAPTER 2 - FEATURES
T
he S
L
L Access ™ has been uniquely designed for specific
EE
EVE
applications and with specific features:
Standard S
L
EE
1. The signal between the 806-B, 806-Bi, 808-P2 or 810-PS2 display and
the S
L
EE
EVE
connected using a standard 7 pin trailer plug.
2. The display operates on 12 volt truck power, and draws less than
200 mA.
3. All-digital design eliminates reading drift or degradation, ensuring
long term accuracy under all operating conditions.
4. Operation from -40 °C to +60 °C (-40 °F to +140 °F) ambient
temperature.
5. Easy installation and servicing with a one year limited warranty.
Additional S
EE
6. An analog 4-20 mA output, with 4 mA corresponding to zero displayed
volume, and 20 mA corresponding to the full scale displayed volume
programmed into the remote display.
7. An RS-485 serial interface available to connect to a a variety of ELD or
fleet management systems.
8. The model S
inside a compact, edge-view enclosure, optimized for top-of-dash or
overhead console mounting. The display is housed in an aluminum
enclosure 2.7" wide x 1.1" high x 3.4" deep (68 mm wide x 29 mm high
x 87 mm. deep).
9. A dimmer button switch enables the operator to control brightness.
10. Simple 6 wire electrical installation - 12V power (red), ground (black),
gauge signal (yellow), analog output (white/blue), RS-485 positive
data (purple) and RS-485 negative data (grey).
Page 4
L Access Features
EVE
L Access ™ is digitally encoded so the signal line can be
L
L Access T-DP0301-B Features
EVE
L
L Access ™ provides an easy-to-read LED display
EE
EVE
T-DP0301-B Manual
Advertisement
