Summary of Contents for Garnet SEELEVEL Access T-DP0301-A
Page 1
MAXIMUM TANK READOUT: ___________________________________________________________________ FULL SCALE ANALOG CALIBRATION VALUE: ___________________________________________________ SERIAL NUMBER : ______________________________________________________________________________ NOTES: _________________________________________________________________________________________ _________________________________________________________________________________________________ _________________________________________________________________________________________________ _________________________________________________________________________________________________ CANADA garnetinstruments.com Garnet US Inc. Garnet Instruments Ltd. 5360 Old Granbury Road 286 Kaska Road 1-800-617-7384 Granbury, TX 76049 Sherwood Park, AB T8A 4G7...
CHAPTER 1 - INTRODUCTION ongratulations on purchasing the Garnet Instruments S L Access ™ Data Portal. The S L Access ™ compliments the MultiRack ™ 806-B, 806-Bi, or S L ™ 808-P2, 810-PS2 gauges by providing an Data Portal & Remote Display additional volume readout in the cab of your truck.
CHAPTER 2 - FEATURES CHAPTER 3 - WIRING DIAGRAMS HE S L Access ™ has been designed for easy installation with your he S L Access ™ has been uniquely designed for specific 806-B, 806-Bi, 808-P2 or 810-PS2 series S L ™...
CHAPTER 4 - DISPLAY PROGRAMMING 806-B Wiring Diagram L Access ™ display shows the tank level by repeating he S the information shown on the 806-B, 806-Bi, 808-P2 or 810-PS2 gauge. The 4-20 mA analog output is calculated from the display level with a 4 mA output corresponding to a display level of zero, and a 20 mA output corresponding to the full scale level programmed into the PURPLE RS-232 RECEIVE...
7. If you press NEXT MENU again from the Abrt display, the CHAPTER 5 - SERIAL INTERFACE menu will return to the beginning with the left digit selected by being bright. 8. If the full scale calibration is below 103, the display will be SeeLeveL ELD Portal Format and Signal Format unable to calculate a valid calibration, and will show cErr (calibration error) after a few seconds.
Page 6
• [0xFE][0xFE][0x24][0x10][0x08][0x00][0x00][0x87][0xC4][0x02][0x00] • [0xFE][0xFE][0x24][0x0A][0x03][0x85][0xB2][0xFF][0xFF][0x2A] [0x01][0x86][0xFF][0xFF][0x2A] • Contact Garnet Instruments at 1-800-617-7384 or at info@ garnetinstruments.com to set up the appropriate working SeeLeveL Query Alarm Status Message (ELD -> SeeLeveL) relationship. Once this is established, the handshake response table will be provided.
Page 7
• Example: ELD has previously issued a SeeLeveL Query Alarm Liquid ELD requests needing handshake confirmation: Level Message (0x07) to a SeeLevel device which does not support alarms: • Start broadcast and Send liquid level • [0xFE][0xFE][0x24][0x0A][0x0F ][0x07][0x40][0xFF][0xFF][0x2A] • The handshake request is done every time one of these requests is received.
CHAPTER 6 - TROUBLESHOOTING GUIDE CHAPTER 7 - SPECIFICATIONS Error Code Cause Solution "0.25% of full scale value Analog output accuracy: ± 0.05 mA" The display is not receiving Minimum input supply voltage: +10.0 V any signal from the 806-B, 806-Bi, 808-P2 or 810-PS2 Minimum difference between input gauge.
Alberta, T8A 4G7. Returned warranted items will be repaired or replaced at the discretion of Garnet Instruments. Any Garnet items under the Garnet Warranty Policy that are deemed irreparable by Garnet Instruments will be replaced at no charge or a credit will be issued for that item subject to the customer’s request.
Page 10
CANADA garnetinstruments.com Garnet US Inc. Garnet Instruments Ltd. 5360 Old Granbury Road 286 Kaska Road 1-800-617-7384 Granbury, TX 76049 Sherwood Park, AB T8A 4G7...