Table of Contents
Advertisement
D I P SW ITCH O P T IONS
F
UNCTIONS
Color change
program
Red LEDs
Green LEDs
Blue LEDs
"User Color"
DMX Mode
This mode allows the unit to be controlled by any universal DMX controller. If you are unfamiliar with
DMX, please read the DMX Primer on page 15.
1)
A working DMX-512 signal source plugged into the LEDsplash™ 2 activates the DMX mode.
DMX Channel Values
NOTE!
Please read all instructions carefully on fixture DMX control mode and addressing.
DMX channels 2, 3, 4, 5 and 6 functions are determined by the current settings of channel 1. For
example, while Channel 1 is set between 000 and 029 the following conditions will apply;
i.
ii.
iii.
iv.
v.
LEDsplash 2 User Manual
D
( ON )
IPSWITCHES
None
1
2
3
4
5
6
7
8
9
Any combination of Red, Green and
Blue LED intensity to create custom
color.
Channel 2 will control the Red LEDs
Channel 3 will control the Green LEDs
Channel 4 will control the Blue LEDs
Channel 5 will control Strobing
Channel 6 will control the Dimmer
11
N
& D
OTES
ESCRIPTION
Music/Auto switch
Music: Sound Activated, Rotary knob sets sound sensitivity
Auto: Rotary knob sets speed of program
Low Intensity
Medium Intensity
Full Intensity
Low Intensity
Medium Intensity
Full Intensity
Low Intensity
Medium Intensity
Full Intensity
For example Dipswitch 9 and 3 ON creates a Pink color
2008-01-22/09:14
Advertisement
Table of Contents
