Reasonably Foreseeable Improper Use; Residual Risks - Electrolux EHT8 Installation And Operating Manual

WARNING
Extraordinary machine mainte-
nance operations must only be
carried out by specialised per-
sonnel provided with all the
appropriate personal protection
equipment (safety shoes, gloves,
glasses, overalls, etc.), tools,
utensils and ancillary means.
WARNING
Never operate
removing, modifying or tamper-
ing with the guards, protection or
safety devices.
Before carrying out any opera-
tion on the machine, always
consult the manual, which gives
the correct procedures and con-
tains important information on
safety.
I.5

Reasonably foreseeable improper use

Improper use is any use different from that specified in this
manual. During machine operation, other types of work or
activities deemed improper and that in general can involve
risks for the safety of operators and damage to the appliance
are not allowed. Reasonably foreseeable improper use
includes:
• lack of machine maintenance, cleaning and periodical
checks;
• structural changes or modifications to the operating logic;
• tampering with the guards or safety devices;
• failure to use personal protection equipment by operators,
specialised personnel and maintenance personnel;
• failure to use suitable accessories (e. g. use of unsuitable
equipment or ladders);
• keeping combustible or flammable materials, or in any case
materials not compatible with or pertinent to the work, near
the machine;
• wrong machine installation;
• placing in the machine any objects or things not compatible
with its use, or that can damage the machine, cause injury
or pollute the environment;
• climbing on the machine;
• non-compliance with the requirements for correct machine
use;
• other actions that give rise to risks not eliminable by the
Manufacturer.
WARNING
The previously described actions
are prohibited!
I.6

Residual risks

The machine has several risks that were not completely
eliminated from a design standpoint or with the installation of
adequate protection devices. Nevertheless, through this
manual the Manufacturer has taken steps to inform operators
of such risks, carefully indicating the personal protection
equipment to be used by them. In order to reduce the risks,
provide for sufficient spaces while installing the unit. To
30
the machine,
preserve these conditions, the areas around the machine
must always be:
• kept free of obstacles (e.g. ladders, tools, containers, boxes,
etc.);
• clean and dry;
• well lit.
For the Customer's complete information, the residual risks
remaining on the machine are indicated below: such situations
are deemed improper and therefore strictly forbidden.
Residual risk Description of hazardous
situation
Slipping or falling The operator can slip due to water
or dirt on the floor
Catching, dragging or Catching or dragging of the oper-
crushing ator or other persons in the drive,
during the machine work phase,
due to improper actions, such as:
• placing an arm inside the
• accessing the rack handling
Use of improper clothing with
loose parts (e.g. necklaces,
scarves, shawls, ties, etc.) or long
hair not gathered, which could get
caught up in moving parts.
The operator deliberately or unin-
Burns/abrasions (e.g.
heating elements, tentionally touches some
cold pan, cooling cir- components inside the machine
cuit plates and pipes) without using protective gloves.
Stab wounds The operator deliberately or unin-
tentionally touches some
components with sharp edges
during the machine cleaning with-
out using protective gloves.
Burns The operator deliberately or unin-
tentionally touches some
components inside the machine or
dishes at the outfeed without using
gloves or without allowing them to
cool.
Shearing of upper The operator violently closes the
limbs front panels.
Electrocution Contact with live parts during
maintenance operations carried
out with the electrical panel
powered
Falling from above The operator intervenes on the
machine using unsuitable systems
to access the upper part (e.g. rung
ladders, or climbs on it)
Crushing or injury The specialised personnel may
not correctly fix the control panel
when accessing the technical
compartment. The panel could
close suddenly.
Crushing or shearing Possible risk of injury to upper
limbs during the hood closing
operation.
machine to remove a stuck rack
without stopping the machine
by operating an emergency
switch;
system without stopping the
machine by operating an emer-
gency switch.