Table of Contents
Advertisement
WARNING
Several
illustrations
manual show the machine, or
parts of it, without guards or with
guards removed. This is purely
for explanatory purposes. Do not
use the machine without the
guards or with the protection
devices deactivated.
I.3
Safety signs to be placed on the
machine or near its area
Prohibition
Meaning
do not oil, lubricate, repair and adjust
moving parts
do not remove the safety devices
do not use water to extinguish fires
(placed on electrical parts)
Danger
Meaning
danger of crushing hands
caution hot surface
danger of electrocution (shown on elec-
trical parts with indication of voltage)
WARNING
Do not remove, tamper with or
make illegible the safety, danger
and instruction signs and labels
on the machine.
I.4
Instructions for use and maintenance
Risks mainly of a mechanical, thermal and electrical nature
exist in the machine. Where possible the risks have been
neutralised:
• directly, by means of adequate design solutions.
• indirectly by using guards, protection and safety devices.
Any anomalous situations are signalled on the control panel
display.
During maintenance several risks remain, as these could not
be eliminated, and must be neutralised by adopting specific
measures and precautions.
Do not carry out any checking, cleaning, repair or maintenance
operations on moving parts. Workers must be informed of this
prohibition by means of clearly visible signs.
22
To guarantee machine efficiency and correct operation,
periodical maintenance must be carried out according to the
in
the
instructions given in this manual.
Make sure to periodically check correct operation of all the
safety devices and the insulation of electrical cables, which
must be replaced if damaged.
I.5
Reasonably foreseeable improper use
Improper use is any use different from that specified in this
manual. During machine operation, other types of work or
activities deemed improper and that in general can involve
risks for the safety of operators and damage to the appliance
are not allowed. Reasonably foreseeable improper use
includes:
• lack of machine maintenance, cleaning and periodical
checks;
• structural changes or modifications to the operating logic;
• tampering with the guards or safety devices;
• failure to use personal protection equipment by operators,
specialised personnel and maintenance personnel;
• failure to use suitable accessories (e. g. use of unsuitable
equipment or ladders);
• keeping combustible or flammable materials, or in any case
materials not compatible with or pertinent to the work, near
the machine;
• wrong machine installation;
• placing in the machine any objects or things not compatible
with its use, or that can damage the machine, cause injury
or pollute the environment;
• climbing on the machine;
• non-compliance with the requirements for correct machine
use;
• other actions that give rise to risks not eliminable by the
Manufacturer.
WARNING
Extraordinary machine mainte-
nance operations must only be
carried out by specialised per-
sonnel provided with all the
appropriate personal protection
equipment (safety shoes, gloves,
glasses, overalls, etc.), tools,
utensils and ancillary means.
WARNING
Never
operate
removing, modifying or tamper-
ing with the guards, protection or
safety devices.
Before carrying out any opera-
tion on the machine, always
consult the manual, which gives
the correct procedures and con-
tains important information on
safety.
WARNING
The previously described actions
are prohibited!
the
machine,
Advertisement
Table of Contents
