Mounting & Connecting To The Engine - Bohmer-AG AG-178-FD Manual

AG-178FD / AG-192FD
Mounting & Connecting to the Engine
Always measure the actual unit before building or drilling mounting frames, drive pulleys etc.
Each engine features a set of holes in the base for mounting and a keyed output shaft. It is essential that the engine be mounted to a suitable
surface, frame etc that is capable of supporting the weight of the engine as well as any twisting forces it generates.
25.4mm (1") Output Shaft (not to scale)
Output Shaft
Output Shaft Flange
Engine Mounting
© Böhmer-AG 2020 09