Safety Recommendations - Teleorigin RB900SG User Manual

Safety Recommendations

Be sure the use of this product is allowed in the country and in the environment required.
The use of this product may be dangerous and has to be avoided in the following areas:
Where it can interfere with other electronic devices in environments such as hospitals,
airports, aircrafts, etc
Where there is risk of explosion such as gasoline stations, oil refineries, etc
It is responsibility of the user to enforce the country regulation and the specific
environment laws.
Do not dismantle the product; any sign of tampering will compromise the warranty validity.
We recommend following the instructions of the hardware user guides for the correct
wiring of the product. The product has to be fitted with a stabilized voltage source and the
wiring has to be conform to the security and fire prevention regulations.
The product has to be handled with care, avoiding any contact with the pins, because
electrostatic discharges may damage the product itself. The same cautions have to be taken
for the SIM, checking carefully the instruction for its use. Do not insert or remove the SIM
when the product is in power saving mode.
The system integrator is responsible of the functioning of the final product; therefore, care
has to be taken to the external components of the module, as well as of any project or
installation issue, because the risk of disturbing the GSM network or external devices or
having impact on the security. Should there be any doubt, please refer to the technical
documentation and the regulations in force.
Every module has to be equipped with a proper antenna with the correct specifications.
The antenna has to be installed with care in order to avoid any interference with other
electronic devices and has to guarantee a minimum distance from people (20 cm). If these
requirements cannot be met, the system integrator has to assess the final product against
the SAR regulations.
1. The unit does not provide protection from lightning and surge. For outdoor installation
use outdoor nonmetallic case, safety approved according UL 50. Additionally you should
provide protection from lightning and over-voltage according to the national code.
2. Be sure that the use of this product is allowed in the country and in the environment
required. The use of this product may be dangerous and has to be avoided in the following
areas: Where it can interfere with other electronic devices in environments such as hospitals,
airports, aircrafts, etc. Where there is risk of explosion such as gasoline stations, oil
refineries, etc. It is responsibility of the user to enforce the country regulation and the specific
environment regulation. Do not dismantle the product; any sign of tampering will
compromise the warranty validity. We recommend following the instructions of the hardware
user guides for the correct wiring of the product. The product has to be supplied with
a stabilized voltage source and the wiring has to conform to security and fire prevention
regulations. The product has to be handled with care, avoiding any contact with the pins
because electrostatic discharge may cause damage. Same caution have to be
taken when handling the SIM, please carefully check the instructions for its use. Do not
insert or remove the SIM when the product is in power saving mode. The system integrator
is responsible for the functioning of the final product; therefore, care has to be taken with
PREAD CAREFULLY
39