1. Safety Recommendations READ CAREFULLY Be sure the use of this product is allowed in the country and in the environment required. The use of this product may be dangerous and has to be avoided in the following areas: – where it can interfere with other electronic devices in environments such as hospitals, airports, aircrafts, etc –...
- RS232 or RS485). RB IndustrialRT has a built-in application whose main task is reporting values of selected MODBUS registers to the http server, communication with servers in the cloud and controlling SCADA systems via SMS and TCP/IP connection.
The package contains a sticker corresponding to the sticker on the modem. The serial number uniquely identifies the modem and ensures that it is the original product. 3.2 Package contents The package contains: RB IndustrialRT modem • GSM antenna (SMA connector) •...
GSM antenna connector – SMA type, female, 50 Ω. Connector is used to connect external GSM antenna. Note: If there is no antenna connected to SMA connector, the connection with GSM network is impossible. 4.2.2 RS232/RS485/GPIO connector Modem RB IndustrialRT is equipped with 10-pin connector with RS232/RS485 and GPIO interfaces...
Page 8
Pinout of 10-pin connecor: Pin number Name Direction Note: Modem can't be used with RS232/RS485 serial cables longer than 3 m.
4.2.4 SIM card holder SIM card holder is placed in front of RB IndustrialRT terminal (as shown below) and is accessible externally. To insert SIM card into the holder press the yellow button, eject the little drawer, place there the SIM card and insert drawer into the modem (you will hear “click”).
Product sticker Product stickers are on the modem and on the box of the product. A production sticker includes the following information: Manufacturer name • The model signature • Product serial number (IMEI) • The CE marking • WEEE symbol (waste electrical and electronic equipment) •...
5. Supported connections The RB Industrial supports general interrogation commands for binary and analog objects. When required, group interrogation command can be used. The RB Industrial scan data on Modbus registers but it send them to monitor station only after interrogation command. Cyclic Data Transmission can be enabled when required.
6. Basic features and services Basic features and available services for RB IndustrialRT are contained in table below: Feature/service Description Supported bands: GSM/GPRS 850/900/1800/1900 Mhz Interfaces Connectors - SMA antenna SIM card - 3.0V / 1.8V - STK 3.1 Connectivity - USB 2.0 HS...
The latest version of this document Technical support This information can be found on our website: www.teleorigin.com For further information you can contact us at: email: info@elpromaelectronics.com tel.: +48 (22) 751 76 80 fax.: +48 (22) 751 76 81...