Using The Blender - Exido 246-050 Manual

111 Clean all accessories before storing the appliance.
See "Cleaning".
IMPORTANT!
• Always remove bone, gristle, tendons, and rind
before grinding the meat.
• Frozen food must be thoroughly defrosted before
grinding.
• The meat grinder must only be used to grind meat.
Avoid grinding pasty foods, e.g. food containing
breadcrumbs, as this could damage the appliance.
• Do not leave the meat
grinder running for
more than 10 minutes
at a time. When the
meat grinder has
been running for 10
minutes, you must
pause for 30 minutes
before using it again.

USING THE BLENDER

Assembly
11 Place the motor section on a flat surface, e.g. a
kitchen counter, and make sure it is standing firmly.
21 Make sure that the protective cover is fitted in the
accessory socket.
31 Dismantle the cover for the blender opening by
pushing it to the right and lifting it off.
41 Place the blender jug (18) in the blender opening
and turn the jug clockwise until it locks firmly into
place. The white triangle on the jug must align with
the black triangle on the arm.
51 Remove the lid (19) from the blender jug.
61 Pour food into the blender jug.
o NOTE! The chopper beaker must never be more
than 2/3 full with liquids or food.
71 Press the release button
for the lid (21) and fit the
lid onto the blender jug.
The curved edge should
be above the pouring
spout. Take care to press
the lid down firmly before
releasing the button.
81 Insert the plug (20) into the
hole in the lid.
Blending
11 Connect the appliance. The indicator next to the
OFF button lights up.
21 Start the appliance by pressing one of the five
speed buttons. Speed button 1 is the slowest and
speed button 5 is the fastest speed.
31 The appliance has a pulse function. Hold down the
P button (f) if you want to blend at extra high speed
for a short time. The appliance stops when you
release the button.
41 You can add more food to the blender jug during
operation through the opening in the lid. Always
stop the appliance before removing the cap and
adding more food.
51 Switch off the appliance by pressing the OFF
button when you have finished blending. Wait until
the blade (17) has come to a complete stop before
removing the blender jug lid. Always unplug the
appliance before you change the accessories or
take the appliance apart.
61 Remove the blender jug by turning it anti-clockwise
and lifting it.
71 Refit the cover for the blender opening.
81 Clean all parts before storing the appliance. See
"Cleaning".
NOTE!
• Do not leave the blender running for more than 2
minutes at a time. If the blender has been running
for 2 minutes, allow it to cool down for 2 minutes
before you use it again.
• Always add liquid to the blender jug when crushing
ice cubes.
CLEANING
When cleaning the appliance, you should pay attention
to the following:
• Remove the plug from the mains socket, and allow
the appliance to cool down completely before
cleaning it.
Do not immerse the motor section of the
•
appliance in water and make sure no water
enters the appliance.
• Clean the motor section by wiping it with a damp
cloth. A little detergent can be added if the
appliance is heavily soiled.
• Do not use scouring pads, steel wool or any form
of strong solvents or abrasive cleaning agents
to clean the appliance, as they can damage the
external surfaces of the appliance.
• Take the appliance apart and clean all of the
accessories separately. The mixing bowl and all
plastic accessories are dishwasher-safe; other
accessories can be cleaned in warm soapy water.
Make sure the parts are not fixed firmly in the
dishwasher as this may change their shape.
• Be careful not to touch the blades or sharp parts
during use and cleaning.
• IMPORTANT! Allow to dry completely after
cleaning. Do not use the appliance if it is damp.
• Ensure the appliance is clean and dry before
storage.
• We recommend you lubricate the meat screens
with vegetable oil after cleaning, and store them in
grease-proof paper to minimise the risk of rust and
discolouration.
25