Refrigerator Operating Characteristics - Electrolux DB52 Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

Refrigerator operating characteristics

To proceed with the proper regulation of the
temperature of your refrigerator, consider the
following factors:
1. The amount of food to be stored.
2. The room temperature where the refrigerator is
installed.
3. The adjustment of the Refrigerator and Freezer
temperature is done through the control panel
buttons located on the door.
WARNING
If you don't want to use the specific
functions of your refrigerator daily,
such as: Party, Shopping, Vacation,
Auto Control, etc., you can adjust your
refrigerator as shown below.
Temperature Control
Amount of food
temperature
A lot
Medium
A little
Below 23 °C
Temperature Electronic Control of the
Freezer and Refrigerator
(Pre-set temperatures from manufacturer)
Adjustment Freezer
temperature
Maximum
-24 °C (max. cold) -2 °C (max. cold)
Medium
-20 °C (med. cold) 3 °C (med. cold)
Minimum
-16 °C (min. cold)
Room
Control
adjustment
Above 23 °C
Maximum cold
Below 23 °C
Medium cold
Minimum cold
Refrigerator
temperature
6,5 °C (min. cold)
Temperature Fine Adjustment Function
FINE ADJUSTMENT OF FREEZER TEMPERATURE
1. It is activated by touching the "AUTO
CONTROL" button 3 times (put in Vacation
function) and, after that, touch 5 times the
FREEZER button.
2. The function is only activated if the 5 touches are
made in the first 3 seconds after the Vacation
function has been selected.
3. When the function is activated, the corresponding
adjustment is shown on the panel. This means that,
for example, if the last adjustment was + 1.0 ºC the
number "10" is displayed on the panel.
4. The first time the function is activated, the
numbers "00" are shown in display. This means
there is no temperature adjustment.
5. Each time the FREEZER button is touched, a
new setting is selected as shown below:
Number of
touches on
Freezer button
0
1
2
3
4
5
6. After 3 seconds with no touch in the button, the
selected setting is kept and the panel returns to
normal operation. This means that the setting
is finished and the cycling temperature of the
freezer compartment will be changed according
to the setting made.
Freezer
Display
adjustment
temperature (°C)
00
0,0
05
+0,5
10
+1,0
-20
-2,0
-10
-1,0
-05
-0,5
41

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Db52xErbl45e3bps

Table of Contents